Lbl-lighting Gypsy SCF Manual do Utilizador descarregar pdf (Página 3)

211

Adjust the aircraft cables until the fixture is level; feed

the cable into the cable clutch to raise the fixture and

push in on the cable clutch nipple to release the cable

and lower the fixture.

Adjust the bands holding the power cord and aircraft

cable to the desired position.

BAND

CABLE

CLUTCH

CABLE

CLUTCH

BAND

212

3D3B

Connect the fixture to a suitable ground in accordance

with local electrical codes.

Connect the black fixture wire to the hot power line wire

with a wire nut.

Connect the white fixture wire to the neutral power line

wire with a wire nut.

Place all wire and wire nut connections inside the

canopy.

Align the canopy holes with the crossbar holes. Secure

the canopy in place by tightening the four screws.

210

SCREWSCREW

NOTE: To replace the lamp, follow section 2 (Install

the lamps) portion of this instruction.

1 2 3 4

Sem comentários

Lbl-lighting Gypsy SCF Manual do Utilizador Página 3