Lbl-lighting Clipper/G CF Manual do Utilizador descarregar pdf (Página 3)

FRONT COVER GLASS SHADE BASE

Replace the glass shade and the front cover onto the base.

Align the front cover holes with the base holes.

CAUTION:To reduce the risk of a burn or electric shock

during relamping, disconnect the power to the fixture.

NOTE:To replace the lamp, follow steps 5 & 6 on page 2,

remove the old lamp, and then follow steps 11 though 14.

SOCKET

LAMP

REFLECTOR

Use Watt GX23-2 BaseMAX 13

Quad Tube Compact Fluorescent Lamp

With The 6953NM and 6953MCNM Models.

Position the wires and wire nut connections behind the

reflector away form the lamp.

Push the lamp pins completely into the socket holes.

Use Watt G24Q-3 Base TripleMAX 26

Tube Compact Fluorescent Lamp With The

6956HE and 6956MCHE Models.

Use Watt GX24Q-1 Base TripleMAX 13

Tube Compact Fluorescent Lamp With The

6953HE and 6953MCHE Models.

While supporting the glass shade and front cover in place,

replace and tighten the four cap screws with the 5/32 Allen

wrench provided.

5/32 ALLEN

WRENCH

CAP SCREW

14 14

1 2 3 4

Sem comentários

Lbl-lighting Clipper/G CF Manual do Utilizador Página 3